Requisition ID: |
Bechtel is providing seconded, consulting services to the Owner Project Management team for the construction of 2 new nuclear units in Southwest England. The units are sited near Bridgwater in Somerset; customer project management office is in Bristol. The project duration is approximately 10 years, with an estimated cost greater than £20 Bn.
Job Purpose / Overview
The Pre-Construction Planning (PCP) Marine Works Construction Engineer will be responsible for considering all aspects of the pre planning of a designated section of the Marine Works on the Hinkley Point C project. This will involve conducting integrated and cross-cutting coordination and reviews of construction preparation, looking at arrangements transparently and in detail from different & wider perspectives to provide oversight, ensuring pre-requisites, dependencies and constraints are managed in a balanced and integrated mode to ensure the activities on the site run safely and smoothly. The primary objective will be to identify and eliminate any issues prior to the work commencing on the site and will involve interfacing with the Engineering, Procurement Construction and Multi-discipline teams to perform the role.
The PCP for Marine Works Construction Engineer will have experience in planning and constructing complex construction projects, including:
- Installation of offshore intake / outfall structures and underlying shafts
- Installation of onshore inlet structures between tunnels and onshore shafts
- Tunnel borings from the onshore facilities to offshore inlet structures and outfall structures.
- Tunnel Boring Machines and liner section installation.
Reports to Pre-Construction Lead for Heat Sink / BOP
Hinkley Point C is a nuclear site, based in West Somerset, 15 miles from Bridgwater. The NNB ambition is to build two major EPR nuclear plants, and the position will be part of HPC Project Management Team working within the Delivery Command Centre located in Bristol, UK.
Because of the scale and complexity of this project, the programme duration and the immovable completion date, the PCP Marine Works Construction Engineer must have proven experience in the execution of large and complex works projects under similar constraints.
The PCP Marine Works Construction Engineer will be a staunch advocate of our Safety culture, and help to embed this approach in all processes and activities undertaken on the project.
Safety is the overriding priority for any activity performed by Pre-Construction Planning which includes nuclear safety as well as Industrial Safety. Planning the work must also recognize the importance of a strong Nuclear Safety and Quality culture and the importance of a right first time attitude.
- Advocate of site construction in the safe and effective planning of work
- Ensuring that conventional and nuclear safety considerations are recognised as essential to the success of the project and built into the planning processes.
- Ensuring that detailed plans are developed to a facility and or area basis which integrate co-ordinate and sequence work activities to achieve the optimum construction sequence paying particular attention to contractor interfaces.
- Looking ahead to identify risks and developing mitigating options in sufficient time so as not to impact the construction site performance.
- Developing a plan which clearly identifies site need dates for critical equipment and materials and implementing monitoring processes to give early warning of any threat or risk to meeting the need dates and developing mitigating actions in time to avoid any impacts to site activities.
- Implementing cross cutting reviews of work scope where the interfaces in areas are intersected by many difference contractors.
- Developing detailed access routes for personnel and equipment, identifying suitability of the access routes, impacts to other work activities and identification of temporary access openings for equipment installation.
- Working closely with the design and procurement groups to conduct constructability reviews to ensure realistic construction expectations are realized.
- Fostering and promoting collaborative working with the Pre-construction planning teams, MDT team members and supply chain partners to achieve a "what's best for the project" outcome at the potential short term impact on an individual contract and ensuring full buy in with the program and project managers.
- Implementing seamless working arrangements with the Engineering command centre and the site command centre to ensure full understanding and alignment with work sequencing plans and release of work scope to the site.
- Implementing a construction readiness review process on work scope packages based on complexity. Readiness review would be based around the construction sequence planning process developed for J0 and would be conducted on a rolling wave basis based on a time scale and frequency commensurate with work scope complexity.
- Implementing the project gateway review process to ensure that packages that pass through gate 2 are complete and will allow construction to complete the work scope efficiently.
- Implementing a construction build philosophy that recognizes the key approach of design by system, maximize productivity by bulk area build and transition to system completion for turnover.
- Maximizing the knowledge gained from lessons learned from previous projects and utilizing the project lessons learned programs for experiences from FA3 etc.
- Early team engagement providing construction input to supply chain contract conditions to ensure site conditions and requirements are included.
- Promoting the schedule development as a construction led and driven approach.
- Ensuring strong ties to engineering and equipment deliverables are made and maintained
- Integrating the supply chain partners resources to maximize their expertise and skill set when developing the schedule and construction strategies to ensure schedule ownership and best practice implementation
- Taking a coordinated and holistic approach to the provision of common shared services such as scaffold, temporary HVAC and electrical services
- Recognizing the importance of other supporting activities such as laydown areas, and work area coordination for activities such as housekeeping and work face storage
- Recognizing the high quality standards of construction that will be required when constructing a nuclear facility and ensuring these are incorporated in the planning of work completion
- HPC Procurement support, contract appendices development, ITTs, bid reviews
- Development of construction site conditions in conjunction with the Project Managers and Commercial and Contract teams.
- Utilise contract partner expertise to the maximum extent possible to ensure their expertise is utilised in construction planning
The post holder will be based at Delivery Command Centre in Bristol and may be required to travel to other company locations in the UK and possibly Europe as required.
Knowledge, Skills, Qualifications & Experience
The PCP Marine Works Construction Engineer will have broad knowledge of Tunneling Design, Procurement and Construction activities and the integration of these activities. In addition a good understanding of project planning processes and the ability to identify and resolve complex interfaces. Experience across many types of EPC contracts specifically knowledge of the NEC and FIDIC contracts is beneficial. Experience in the ability to work collaboratively with a wide range of stakeholders is an essential skill set required of the job holder Strong management and communication skills and commercial awareness are essential to successfully performing the role. Previous tunneling experience is a clear advantage. Therefore demonstrable competencies within Marine Works and tunneling in construction fields will be considered for the role challenges.
- Understanding of working in a Nuclear and Safety Quality Culture
- Understanding and awareness of working in a highly regulated environment
- Ability to build and manage a diverse and high performing team
- Ability to work collaboratively and in an integrated team environment
- Excellent organisational and communication skills
- Management of strategic planning developing construction sequencing and recovery plans.
- Good working knowledge of commercial principles affecting construction matters
- Ability to produce informative, concise reports
- Motivational approach and the ability to energise team members by building a climate of trust and understanding
- Awareness of project change control and, risk management processes
- Good working knowledge in the delivery of large complex construction projects
- Degree in Mechanical Engineering or Equivalent in Construction Management or related subject or a demonstrable level of experience based on project assignments
- Experience of operating in a high security environment advantageous
- Strong communication skills in English required
Shaping tomorrow together
- Being positive in approach
- Remaining calm and determined even under pressure or changing circumstances
- Be able to create a climate of trust
- Drive for strong performance
- Autonomy: capacity to have initiative and to organise his work from general requirements and targets
- Encourage lateral thinking and problem solving
- Ability to influence at a senior level with both internal (within EDF Energy and EDF Group) and external audiences as required
- Be able to build effective relationships, demonstrate confidence in others ability to perform to the highest standards
- Motivational to other team members, Engineer with a "can do" attitude
- Persuasion and Influence
- Good organisational awareness
- Motivating and Energising; Communication & Influence; Equality, Diversity & Inclusion
- Change & Innovation; Proactive Approach; Stakeholder Focus
- Knowledge and Information Sharing; Teamwork; Interpersonal Skills
- Goal Setting; Sustainability; Evaluating Options, Personal Development
- Establishes a network across a broad sphere of influence, including all stakeholders and competitor organisations that achieves an integrated approach to continuous improvement.
- Time Management:
- Plans and organises effectively in order to deliver objectives.
- Proactive Approach:
- Builds a climate of high performance with ownership for standards and delivery, while acting on own initiative for the good of the organisation
- Goal Setting:
- Sets challenging goals and objectives to security contractors and provides support where necessary.
- Results Orientation:
- Demonstrates drive and determination to achieve objectives and to deliver results for all security related contracts and procedures
- Contract Obligations:
- Liaise with the Construction Planning team and Mechanical Programme Team to advise of any issues that come to light that should be addressed contractually such as:
- Issuing required notices.
- Matters relating to Changes/Variations
- Information Required
- Participate in risk workshops as required
- Attend and contribute to team, project, client and third party meetings as required
Bechtel is among the most respected engineering, project management, and construction companies in the world. We stand apart for our ability to get the job done right-no matter how big, how complex, or how remote. Bechtel operates through four global business units that specialize in infrastructure; mining and metals; nuclear, security and environmental; and oil, gas, and chemicals. Since its founding in 1898, Bechtel has worked on more than 25,000 projects in 160 countries on all seven continents. Today, our 53,000 colleagues team with customers, partners, and suppliers on diverse projects in nearly 40 countries.
An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without
regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected
veteran status and will not be discriminated against on the basis of disability.